Tianjin Haiyuan Automatic Control System Co., Ltd.
Main products:Industrial Electrical Appliances
Products
Contact Us
  • Contact Person : Ms. Du Miranda
  • Company Name : Tianjin Haiyuan Automatic Control System Co., Ltd.
  • Tel : 0086-022-27373707
  • Fax : 0086-022-27373701
  • Address : Tianjin,Tianjin,ADD:503 ROOM, 3 GATEWALL,2 BUILDING,TAIBEI GARDEN,HUANGHE ROAD,NANKAI DISTRICT.
  • Country/Region : China
  • Zip : 300102

(3)OMRON E2EM-X15X1 2M Proximity Switch

(3)OMRON E2EM-X15X1 2M Proximity Switch
Product Detailed
OMRON E2EM-X15X1 2M Proximity Switch :No-polarity 2-Wire Proximity Sensor with a 30-mm Sensing Distance

OMRON E2EM-X15X1 2M Proximity Switch 

specification

RATING AND PORFORMANCE

Shield

Shielded

Cylinder type sensing head size

M30

Sensing method

Inductive type

Sensing distance

15 mm -10% to +10%

Setting distance

0 to 12 mm

Differential distance

10% Max. of sensing distance

Sensing object

Ferrous metal (Sensitivity lowers with non-ferrous metals.)

Standard sensing object

Iron 30*30*1mm

Response frequency

DC: 0.25 kHz (average)

Power supply voltage

12 to 24 VDC (ripple(p-p) :10% Max.)

Operating voltage range

10 to 30 VDC

Leakage current

0.8 mA Max.

Control output (Output type)

DC 2-wire models with no polarity

Control output (Switching capacity)

3 to 100 mA

Control output (Residual voltage)

(DC) 5 V Max. (under load current with cable length of 2m)

Indicator

Operation indicator(red), Operation setting indicator(green)

Operation mode

NO

Protective circuit

Surge suppressorOutput short-cut protection

Standard or Different frequency

Standard

Ambient temperature

Operating: -25 to 70 CELStorage: -40 to 85 CEL(with no icing or condensation)

Ambient humidity

Operating: 35 to 95 %RHStorage: 35 to 95 %RH(with no condensation)

Temperature influence

+-15% Max. of sensing distance in temperature range of -25 to +70CEL(As the basis for sensing distance of 23CEL)

Voltage influence

+-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)

Insulation resistance

50 M OHM Min. at 500VDC between charged parts and the case

Dielectric strength

1000 VAC 50/60 Hz for 1 minute between charged parts and the case

Vibration resistance

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

1000m/s2 for 10 times each in X, Y, and Z directions

Degree of protection

IEC60529: IP67Company standard: Oil-proof

Applicable standard (EC Directive (Low Voltage Directive))

EN60947-1EN60947-5-2

Applicable standard (EC Directive (EMC Directive))

EMI: EN60947-5-2Emission Enclosure: CISPR11 Group 1 classAEMS: EN60947-5-2Immunity ESD: IEC61000-4-2Immunity RF-interference: IEC61000-4-3Immunity Conducted Disturbance: IEC61000-4-6Immunity Burst: IEC61000-4-4CE marking: Equipped

Applicable standard (CCC mark)

Not equipped

Connection method

Pre-wired models (Cable length: 2 m)

Weight (Packed state)

approx. 180 g

Material (case)

Brass nickel plating

Material (sensing surface)

PBT

Material (clamping nuts)

Brass nickel plating

Material (toothed washer)

Iron zinc plating

(3)OMRON E2EM-X15X1 2M Proximity Switch



Copyright Notice @ 2008-2022 ECVERY Limited and/or its subsidiaries and licensors. All rights reserved.